Repair Kits

Zenith 24T2 float, Part #012318
New ones are now plastic
£13.75

Zenith 12T parts, ball float & gaskets £10.00
No needle valves left

Zenith 24T2 repair kit, gasket kit £4.99, Throttle spindle 012628 £9.99, Needle valve 017810 £9.99, or £23 the lot

B10 Carb Oil bath Air Filter Kit, 1 New Plastic Cup, 1 New Filter Cartridge
2 New Clips, 2 New Fix Screws
Fits Under Filter Cover Marked V1270/1C
£24.20
Or any part seperate, cup £12.00, Filter cartridge £9.99, new clips x2 £1.95, new fix screws x2 £1.25

Ewarts fuel-petrol tap-petcock repair kit
New plunger,New Grub Screw, New Sealing Washer
In bare brass or bright silver plating
£8.95

New Villiers Floats

Carb types- S24, S25, Type 4/5,
49mm wide x 25mm high
£9.90

Carb types- S19 Carb,
41mm wide x 22mm high
£12

Brand NEW V107x1E float, For carb types
Junior (Marked V508), type 3/4 (marked V648C), Midget type
V type (Marked CM358 under flange), 42mm Wide x 28mm High x 11mm ID centre hole
£9.99

Carb types- S12
38mm wide x 23mm high
£9.99

Zenith 13TC carb repair kit, new, float, needle, seat, gasket, Washers,
£17.75
Or any part seperate

New "Press In" Fuel Needle Seats
To Fit Most Villiers Carbs
£4.75
New Needles £4.75
Stops The Annoying Flooding Problem
Make sure of Carb Model/Type Before Purchase

Villiers B10 carb repair kit £17.40
All other parts available for this carb

Villiers V type carb repair-service kit
£16.60 the lot, (new floats £9.99)

Amal 379 repair kit £22.45
All other parts are available for this carb

Gasket kit S24, S25 Carbs
£3.25

Petrol tap plunger, pull on turn to lock
Face of knurled wheel is marked as such
£6

S12 Carb Repair Kit
£14.49

Ewarts Fuel Tap
Plungers
In bare brass or bright silver plating
£6.75

S10 Repair Kits
£14.75

Amal 379 Washer Kit
£3.25

Ready Made Fuel Line inc Fittings
8" Long End to End
£8.90

Seagull outboard fuel line complete, for use with villiers junior carb
£9.99

Ready Made Fuel Line inc Fittings
15.5" Long End to End
£9.99

Howard rotavator fuel tank caps, Brand new items, £24.00
Caps will fit filler necks with 2 pegs inside at opposites 1/4" down from top, Fit filler neck ID 1,3/4 x OD 2", May also fit some motorcycle tanks & maybe others, like some JAP tanks, Finish is a bright chrome look

10" & 12" FUEL LINES ALSO IN STOCK

Acid Cleaned and Replated Fasteners and Clamps
done in Bright Silver Zinc

Filter Insert For F12
Sloper with B10 Carb & Offset Air Filter Mount
= SOLD OUT =

New Amal Fuel Inlet Needles
These vary in length, We need the part number if you have it or the length of your old needle
(distance from top to float clip notch)