Carburettor and Fuel System Spares

AIR CLEANERS ARE -NOT- INCLUDED ALONG WITH ANY CARB, THEY ARE SUPPLIED AT EXTRA COST

Petrol tap pipe spigots for either 3/16" or 1/4" bore pipe
To take 7/16" GAS/BSP thread nut
£1.99

Fuel tap adaptor,1/8 BSP/GAS
up to 1/4 tank fit
£2.75

Petrol tap pipe spigot nut 7/16"
to suit taps shown below
£1.99

1/8 BSP Thread blanking plug
14mm spanner size hex
Nickel plated
£2.25

Fuel tap adaptor,1/4 GAS internal thread, steps up to 3/8 GAS external
height of this part is 5/8", distance across flats of hex is 13/16"
£3.25

Fuel tap adaptor, 1/8 GAS internal thread
steps up to 3/8 GAS external, height of this part is 7/16"
distance across flats of hex is 3/4", hex thickness 3/32"
£4.75

Petrol tap solid brass, Pull on push off type
1/4 GAS/BSP to tank thread
Outlet spigot for 1/4 Bore pipe
£26.00

All Zenith and Amal Carbs are old genuine stock and not reproductions

New EM487 metal air filters
fits 7/8 stub
£17.50

BSA Bantam, Seagull outboard, etc, Vertical plunger taps, Stainless mesh filter, bright plated steel grub screw, 1/8 BSP/GAS thread tank fit, 7/16 O/D outlet thread OR push on pipe outlet barb
£17.99

Villiers Air Filter
fits 1 1/8" stub
New old stock items £27.00 few left now

Code Number 18435 NEW Push/Pull Fuel Tap (Petcock), 1/8BSP Tank Thread, Push on Pipe Outlet 3/16 Dia, New Rubber Seal Plunger so no more shrinking corks, Stainless Steel Mesh Filter, Plated Grub Screw £21.50	Code number E9724 NEW Push/Pull Fuel Tap (Petcock), 1/8BSP Tank Thread, 7/16 O/D outlet thread, New Rubber Seal Plunger so no more shrinking corks, Stainless Steel Mesh Filter, Plated Grub Screw £17.99
All above taps and plungers are now available bright shiny silver plated

Petrol fuel tap vertical lever type, solid brass
1/8 GAS/BSP Tank fit, fits threaded tank hole I-D 3/8"
7/16 GAS thread outlet, Real chunky brass tap
£27.95

Petrol fuel tap vertical lever type, Solid brass
1/4 GAS/BSP Tank fit, fits threaded tank hole I-D 1/2"
1/4 GAS Thread outlet, real chunky brass tap
£27.95

Petrol fuel tap vertical lever type, Solid brass
1/8 GAS/BSP Tank fit, fits threaded tank hole I-D 3/8"
1/4 GAS Thread outlet, real chunky brass tap
£27.95


NEW plunger tap (petcock) 1/4 x 1/4 GAS/BSP threads Stainless steel mesh filter fitted #690A £19.95	Vertical Lever Tap 1/8BSP Thread Tank fit Push on pipe outlet for 1/4 bore pipe Old Stock British make £9.99

Miniature hose clips, 9mm open, 7mm closed
35p each

Pull on turn to lock tap plunger + grub screw
Excellent readable script on knurled wheel face, To replace cork when needed?
Remove screw from plunger end, Renew cork replace screw, bright shiny Nickel plated
A superb product all round, Also available in bare brass finish
£8.95

Petrol fuel tap elbow, right angle, push on pipe barb takes 1/4 bore pipe
1/4 GAS thread nut, bright silver plating
£6.25

Petrol fuel tap 1/8 GAS/BSP thread on top, (To fit threaded tank hole I-D 3/8")
CW 1/4 GAS nut & straight parallel tail 3/8 O-D
Push on slide HEX side, push off round Knurled side, Chrome finish
£27.95

Petrol fuel tap 1/4 GAS/BSP thread on top, (To fit threaded tank hole I-D 1/2")
CW 1/4 GAS nut & straight parallel tail 3/8 O-D
Push on slide HEX side, push off round Knurled side, Chrome finish
£25.00

Petrol fuel tap 1/4 GAS/BSP thread on top, (To fit threaded tank hole I-D 1/2")
CW 1/4 GAS nut & straight parallel tail 3/8 O-D
Push on/off Round Knurled wheel both sides, Bright nickel plated finish
£25.00

We often have reconditioned fuel taps, cleaned, fitted with new cork for £9.50

Villiers carburettor parts, blast cleaned, replated bright silver, makes any rebuilt carb look like new

Reclaimed brass banjos, Bright silver plated
can be supplied to take either 3/16 or 1/4 bore pipe
large hole end size 7/16 I-D x 1/2" thickness, £4.75
Grey die cast type to take 3/16 bore pipe also available
£4.49

Brass banjos for soldering to 1/4" O-D copper pipe
Large hole end 7/16 ID x 1/2" thickness
£4.75

Villiers made B12 carbs £25, New unused, flat horizontal flange
1"7/16 Hole centres, 2 fix holes are 1/4", spares available, could be used on
another application, All air cleaners available

B10 Dry filter cartridge,
bowl, hood & clips
New Stock

New vertical lever tap, 1/8BSP tank thread
7/16GAS thread outlet, Nickel plated
£23.00

New B10 Oil bath filter cups
fit filter cover V1344/1D
Both Sizes Available, 3 1/4" OR 2 5/8" length £12.00
Filter insert cartridges £9.99

B10 Carbs and Parts

Zenith 13TC carbs New When available £39.50, Recon exchange £35.00

BSA Carburettor, AMAL 343, Stripped blast cleaned, replated steel parts
£39.50 Exchange

New, Used and Recon Junior Carbs

Wolseley carburettor recon, Send us your carb for strip down, vapour blast clean & fitment of new correct air filter cover screws, We can also do the same for either of the 2 size,s of AMAL float bowl associated with these & renew all the old rusty steel parts, We dont have any parts for the carb itself, (Apart from the 2 screws on the front), but have most all parts for either size float bowl

New Amal 379 Carbs & Parts
(Air Filters Sold Seperately)
NEW £69.00 Recon exchange £39.95

All complete carbs sold only parts left

Villiers type 4/5 carb, Fitment to 1,1/8" stub
Recon exchange £95.00
V660 Air cleaner for same £29.00

New and Recon V Type Carbs

Ewarts Fuel Tap
Plungers £6.75

New and Recon V648C Type Carbs


Petrol taps, Petcocks, 1/8bsp tank thread, Red one is push pull on/off, Black one is twist on/off £9.95

All parts available seperatly